Experimenting with a portable setup for a grabber I am trying out the following :
A Sony SW-100 portable receiver (top) with SSB with a piece of extra wire connected to the telescopic antenna, using a EeePC with SpectrumLab running under Windows XP, upload software is ArgoUpload.
At the moment looking at 3599.850 - 3600.050 kHz for QRSS signals.
Long path opening on 28 MHz from Ireland to Australia - March 2024
-
Conditions on the *28 MHz* band over the last few weeks have been excellent
and using the *WSPR* beacon mode, I have heard 20 stations in Australia on
th...
1 hour ago
G'day Jan
ReplyDeleteI seldom use SpecLab so don't recall detail.
You can turn numbers in the frequency scale
by 90 degrees so we can read that scale better.
Good luck and hope to see my sig on your unit.
John, VK6JY