Today I received the kit from the magazine "Funkamateur" with all necessary parts to build a "single frequency SDR", similar to the SoftRock, along with a few other components for my constructions.
Like for Joachim, one resistor had a 1000 times larger value than the one needed. No problem, since I had one of the correct value.
Some solder smoke generated, not quite finished yet, but it is time for some reading.
Jay KI5VIR's FB Homebrew SolderSmoke Direct Conversion Receiver
-
*Jay KI5VIR is a new ham, but you would never know this by looking at his
build of the direct conversion receiver: It looks like something built by
someon...
1 day ago
Hahaha, as if I did not know... you could not resist ,-)
ReplyDeleteCheers!